The Method to Make a Rose Bead Necklace

How Do We Make a Wire Wrapped Stone Necklace

Wire wrapping can be a jewelry-making method that jewelers bend and wrap metal craft wire around beads or stones. This process is wonderful for making stone pendants and necklaces, particularly with stones that possess no hole for stringing. Using inexpensive craft wire along with a stone either purchased with a craft store or entirely on a nature walk, you can make a wire-wrapped stone pendant Cheap Stud Earrings.


1
Measure and cut three 6-to-8-inch lengths of 24-gauge craft wire, with respect to the height from the stone. Straighten and lay the wire alongside and mark the guts point on the 3 wires. Bundle the wires together and string a crimp bead round the bundle. Line up the center marks and crimp the bead with crimping pliers, ensuring the bundle lays flat when crimped.
2
Squeeze bundle using the crimp bead at the end center from the stone and gently mold the bundle round the stone. Mark the bundle on the midpoint with the stone for both sides, adding and crimp with a crimp bead on those marks.
3
Mold the bundle more firmly round the stone and make a 90-degree bend in which the two payments at the top center with the stone to create the neck with the pendant. Temporarily secure the neck with a small plastic rubber band.
4
Tighten the bundle round the stone by pulling the outer wires with the bundle toward the center of the stone for both sides. Using flat nose pliers, make small bends in the outer bundle wires halfway between each crimp bead on the bottom and between your crimp beads as well as the neck on top.
5
Eliminate the rubberband from your neck and gently pull apart the six wire tails. Twist the 2 center wires on both sides together 3 or 4 times, and then curl the ends backward with round nose pliers to form a double loop, laying the ends flush with all the twist.
6
Measure and cut 4 inches with the 24-gauge wire and coil-wrap the twisted loop and the other four tails together. Using flat nose pliers, create flat coils about the ends with the four remaining tails and lay them flat from the coiled neck. String ribbon or cord with the double loop and wear Cheap Stud Earrings.

Ingen kommentarer endnu

Der er endnu ingen kommentarer til indlægget. Hvis du synes indlægget er interessant, så vær den første til at kommentere på indlægget.

Skriv et svar

Skriv et svar

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *

 

Næste indlæg

The Method to Make a Rose Bead Necklace